apl论文格式

apl论文格式

　　APL投稿时，需要什么提交格式，要提交哪些材料?

　　投过一篇，发现被直接拒稿。后来才想明白，原来投稿系统中可能有个功能，看看有没有引用APL的文献，如果没有，那就直接被拒了。编辑发给我的信中，也直接这样写了，说还是投到你引用的期刊上发表吧。

　　科研不知APL，投遍论文也枉然!实验室的老师和师兄师姐们论文投稿的第一选择都是APL，录了很多篇了，自己做了一个小东西，有点创意，但和拼指标的论文相比，相距甚远!在老师的鼓励下，写了份详细的稿件，老师看后，提出三点，也就是APL的精髓：A代表应用背景扩展，P代表物理模型解析，L代表新颖性和创新性。论文的重中之重要先L，再P，最后A!自己在这样的思路指导下，坚决执行L-P-A顺序对论文开始重新组织：L是老师给指出来;P的话，花了很长时间，大概一个多月，读了30多篇相关文章，模型根基才算打牢;和老师商量了A，再把图片一个个的清晰化(很关键)，前后2个月，完成文章!投出去后，赶上圣诞节，到大年初二，意见回来： Reviewer #1 (Comments to the Author): This is a useful contribution to the field. It should be published "as is".

　　这是个比较快的杂志，收和拒都很快的，如果你做的比较有新意，可以选择投稿，去年投了一篇，修了两次接受大概用了3各月，今年投了两篇，一篇投稿四天后直接接受(这个有一定运气成分，但这篇文章准备了一年半，之前修改的比较多了) 一共投稿五次，中了两篇，一篇送审。文章要有很新的物理思想，

　　倘若结果不好，就要看论文通篇的写法。最近几年，稿件的标准有所提高，最通常的原因往往是因为稿件缺乏深刻的物理内涵。所以最适合投稿APL的工作是，有足够的创新性，并且通过深入谈论，得出非常明了、直接的结论。

　　APL老牌杂志，影响广泛。 因为存在pre-screening，编辑直接拒稿率较高。一个审稿人，存在较大随机性，不过一般审的都不错(毕竟是老牌杂志，审稿人数据库比较完善)。个人认为要比nano letters等“家族”式期刊更具参考价值。其论文被引用总量在SCI期刊也是佼佼者。值得投稿!

　　材料类全球权威期刊，去年中了一篇，前后大修2次，小修1次，APL审稿速度很快，从投递初稿，到修改，接收，整个来回将近20天。最大的感触就是APL的摘要需要限制在100个单词之内 APL上面的文章，比较强调时效性、与应用和实验研究挂钩。好处是刚出来时候看的人多，缺点是读者兴趣随时间快速衰减。与它互补的有发表长篇的J. Appl. Phys. (JAP)。

　　APL是二类杂志中比较好的。特点是研究内容容新，具有应用背景。现在是一个人审稿，审稿速度超快。文章的观点明确，内容较短。内容新颖，具有物理思想的文章中APL比较容易。

　　应用物理类的最好期刊，要求的东西比较新，而且有一点的物理思想。1要足够Applied，没有应用背景的文章比较难中， 2要有Physics，没有物理思想，或者物理思想不清晰的文章会比较困难，3是Lett，就是要新，别人没做过的。

　　apl投稿注意事项：

　　前段时间投了一篇APL,花了好长时间都没有结果，其实是未投完。为防止虫友们犯类似错误，现将apl投稿注意事项和大家分享。

　　We note that you still have an unfinished submission at the APL manuscript submission & peer-review website. Please complete that process as soon as possible. If you no longer wish to make the submission, then please email us so that we can close out your submission.(投完后转换成pdf后觉得没问题一定要确定)

　　In checking in your manuscript data and files submitted to Applied Physics Letters, it has come to our attention that the following must be addressed before we can begin the peer review process:

　　************************

　　ALL authors must be included in the submission form so that they will be linked with the manuscript. Please return to the submission form and complete the author list.---The submission form is located in Modify Manuscript Metadata.

　　Submit a SEPARATE Figure file for EACH figure cited in the article; NOT one file containing all figures. Submit only one figure per file. Submit all the parts of a figure as one file [e.g., Fig. 1(a), 1(b), and (c) in one file].

　　AIP prefers the following formats for Figure source files: TIFF (.tif), PostScript (.ps), Encapsulated PostScript (.eps). However, if you do choose PDF figure source files, please make sure that the guidelines for preparation of an acceptable PDF illustration are followed closely. Your manuscript may be delayed in the production process if the guidelines are not met. See http://ftp.aip.org/aipdocs/forms/pdf_figs.pdf

　　"First" and/or "to our knowledge" and/or "successfully" and/or "New" and/or Novel" are not allowed in the manuscript. Remove from your title, abstract and/or text.---New

　　Et al is not allowed in the Abstract.

　　Do not use "et al." in the reference list. Show all names with initials preceding.

　　An abstract, carrying the title and complete by-line, must be double-spaced and placed on a page separate from the Introduction.

　　Acronyms in the Abstract that are used only once are unnecessary there, but define ALL acronyms in the text the first time used.

　　Place the Equation numbers flush with the right margins.

　　Place the article file in the proper order - references, table, and then figure captions.

　　The Article file should ONLY contain the Title/By-line/Abstract page, Text, Reference page(s), Tables (if any), and Figure Captions. REMOVE the figures from the Article file.

　　Ticks to indicate coordinate values, placed within all four sides of the

　　graph, increase readability, and are recommended.

　　Please check the length of your article carefully. THE EDITORIAL OFFICE DOES NOT COUNT WORDS. THE LENGTH IS THE RESPONSIBILITY OF THE AUTHOR. See http://apl.aip.org or the "Estimates of Finished Length" link provided at the top of all APL PeerX-Press pages.

　　************************

　　*** IMPORTANT: Please note that you should NOT start the submission process over again, and submit your manuscript new. ***

　　Your manuscript has been placed back at the Author Approval of Converted Files stage, where you may again access it and make changes. Proceed to the following URL:

　　(You may need to copy/paste the complete URL into your browser's address/location bar, if clicking on it within your email reader doesn't work.)

　　On the Approve Files screen, you will also find a link to click that will display (in a separate browser window) this present SUBMISSION CHECK email letter, for your convenience.

　　*** DO NOT BEGIN A NEW SUBMISSION OF YOUR PAPER. Work with the data you have already entered and the files you have already uploaded. ***

　　Please make the correction(s) as specified above, and using the link supplied above, either replace, delete, or add files as appropriate. Be sure to view and approve any new converted PDF files, and then approve the complete submission package, which returns it to the editorial office for further processing.

　　We will check the modified submission package again, and send a followup email to advise you of its status for entry into peer review.

　　Thank you for submitting your work to the Applied Physics Letters.

【apl论文格式】相关文章：

论文格式03-17

法学论文格式11-28

论文格式及要求03-29

数模论文格式03-29

sci论文格式03-24

emba论文格式03-29

cnki论文格式01-18

istp论文格式11-13

论文格式制作11-13

改论文格式02-19