国际认证RHCE（红帽认证）考试试题
中国加入WTO后，知识产权保护将逐步规范，使得更多企业转向成本低廉的.Linux操作平台。下面是小编整理的关于国际认证RHCE(红帽认证)考试试题，希望大家认真阅读!
1. If you want to allow X-Windows programs from hostB to run on the display on hostA what would you need to do?
A. run xhost +hostB on hostA.
B. run xhost +hostA on hostB.
C. run xhost + on hostA.
D. run xhost + on hostB.
E. just set the DISPLAY environment variable and it will work.
You answered this question incorrectly
Explanation: You want programs from hostB to display on hostA. So you must tell hostA to allow Xclients from hostB. Hence A is correct. The xhost + command is too broad and allows anyone to connect to your X-server.
2. What command can you enter to find out which rpm contains the /etc/foo file?
A. rpm -qa |grep foo
B. rpm -ql /etc/foo
C. rpm -qlf /etc/foo
D. rpm -q -f /etc/foo
E. man foo
You answered this question incorrectly
Explanation: You can find out which rpm a file belongs to by using the rpm -q -f command. You must have the redhatrpmdb rpm installed though.
3. You have a Linux machine that does not have X-Windows configured. What command can you use to find out what kind of graphics card it has?
A. Xfind
B. SuperProbe
C. Xsetup
D. cat /proc/video
E. videocfg
You answered this question incorrectly
Explanation: The SuperProbe program is used to find information about your graphics card.
4. Which installation class will automatically delete all of your DOS partitions?
A. Custom
B. Workstation
C. Laptop
D. Server
E. All of the above
You answered this question incorrectly
Explanation: The Server installation class will automatically delete all DOS partitions. The workstation class will use availiable free space. The laptop class is very similar to the workstation class (but for laptops.)
5. How do you install an RPM?
A. rpm -evh packagename.rpm
B. rpm -ivh packagename.rpm
C. rpm -q packagename.rpm
D. rpm -qa *.rpm
E. rpm -ql *.rpm
You answered this question incorrectly
Explanation: A is wrong because the -e option is for uninstalling. B is right. C D and E are wrong because the -q option is for querrying.
6. What program can be used to test the smb.conf file for errors?
A. mount
B. test
C. samba --checkparm
D. testparm
E. smbfs
You answered this question incorrectly
Explanation: the testparm program parses the smb.conf file and reports any errors. If you make a typo this program is likely to find it.
7. What command do you use to edit the default grace period for quotas?
A. quotaconfig -g
B. editquota -g
C. quotaconfig -t
D. edquota -t
E. quotaeditor --grace
You answered this question incorrectly
Explanation: You use the edquota command to edit quotas. For example you can say edquota -u username to edit a specific user’s quota. Or you can type edquota -g to set a quota for a group. You can say edquota -t to set up grace periods.
8. What is the correct syntax to mount an MS DOS formatted floppy disk (do not assume that there is an entry in /etc/fstab)?
A. mount /dev/floppy /mnt/fd0
B. mount -t iso9660 /dev/fd0 /mnt/floppy
C. mount -t vfat /dev/fd0 /mnt/floppy
D. mount -t msdos /dev/floppy /mnt/floppy
E. mdir
You answered this question incorrectly
Explanation: A will only work if there is an entry in /etc/fstab. B is wrong because iso9660 is for CDROM’s. C is correct. D is wrong becuase the device should be /dev/fd0 rather than /dev/floppy.
9. You have created a /home/projectfoo directory. How can you change its group ownership to the projectfoo group?
A. chmod g+rwx projectfoo /home/projectfoo
B. chown projectfoo /home/projectfoo
C. chgrp projectfoo /home/projectfoo
D. newgrp projectfoo /home/projectfoo
E. chown projectfoo.users /home/projectfoo
You answered this question incorrectly
Explanation: The chgrp command sets the group ownership of a file or directory.
10. You have installed a DHCP server on your Linux machine and edited the configuration file. What else must you do before it will give out ip addresses?
A. reboot
B. Put fixed-addresses in the configuration for each client.
C. service dhcp begin
D. touch /var/lib/dhcp/dhcpd.leases
E. All of the above
You answered this question incorrectly
Explanation: You must touch the /var/lib/dhcp/dhcpd.leases file in order to get DHCP to begin giving out ip addresses.
11. How do you enable quotas on a partition in /etc/fstab?
A. Add the enforcequotas option.
B. You don’t. Quotas are turned on automatically when you install the quota rpm.
C. Add the quota option.
D. Add the usrquota and grpquota options.
E. You put a 1 in the last column.
You answered this question incorrectly
Explanation: To enable quotas on a partition you put the userquota and groupquota option in the options section for the partition in /etc/fstab.
12. You want to compile a new kernel. You have just run
A. make bzImage
B. make dep
C. make clean
D. make mrproper
E. make xconfig
You answered this question incorrectly
Explanation: The first thing you should do in the /usr/src/linux-2.4 directory is
make mrproper
Thencomma you should do the following: make config | make menuconfig | make xconfig
make dep
make clean
make bzImage
make modules (if modular kernel)
make modules_install (if modular kernel)
cp System.map /boot/System.map-2.4.17
cp arch/i386/boot/bzImage /boot/vmlinuz-2.4.17
cp .config /boot/config-2.4.17
mkinitrd /boot/initrd- # Depending on kernel configuration
Update LILO or GRUB
Reboot into new kernel
13. You are configuring a Linux DHCP server. You have it setup and working (as Linux clients are getting ip addresses from the DHCP server fine) but some Windows 95 clients are not getting ip addresses properly from your DHCP server. What do you need to do?
A. route add -host 255.255.255.255 dev eth0
B. route add -net 255.255.255.255 dev eth0
C. service dhcp restart
D. touch /var/state/leases
E. Windows 95 is not compatible with a Linux DHCP server.
You answered this question incorrectly
Explanation: Windows 95 insists that the DHCPOFFER messages be sent to 255.255.255.255. Linux will send them to the broadcast address instead. Adding a host entry for the host 255.255.255.255 will trick Linux into working with the Windows 95 clients.
14. You want to add a directory to all users paths. What file should you edit to do this?
A. /etc/sysconfig/profile
B. /etc/sysconfig/profile
C. /etc/bashrc
D. /etc/profile
E. /etc/env
You answered this question incorrectly
Explanation: The /etc/profile script is used for system-wide enviornment variables and startup files. You could also create a new file in /etc/profile.d/ that ends in .sh and set the enviornment variable in there. Keep in mind that not all users will necessarily use bash.
15. Which files are used to configure TCP Wrappers?
A. /etc/tcpwrapper.conf and /etc/hosts.conf
B. /etc/hosts.allow and /etc/hosts.deny
C. /etc/tcpwrapper.conf and /etc/xinetd.conf
D. /etc/access.conf and /etc/xinetd.conf
E. /etc/tcpwrapper and /etc/access.conf
You answered this question incorrectly
Explanation: TCP Wrappers are configured in the /etc/hosts.allow and /etc/hosts.deny files.
【国际认证RHCE（红帽认证）考试试题】相关文章：
RHCE认证考试经验分享10-25
Linux认证考试RHCE考试大纲09-23
RHCE认证考试后的优势11-11
红帽认证考试内容10-29
Sun国际认证考试试题11-06
LINUX认证：RHCE通关技巧10-17
红帽认证和思科认证的区别11-06
苏州红帽认证工程师认证简介11-05
红帽认证体系架构介绍11-10