Semiconductor Processors

Semiconductor Processors 

• Nature of the Work
• Working Conditions
• Training, Other Qualifications, and Advancement
• Employment
• Job Outlook
• Earnings
• Related Occupations
• Sources of Additional Information

Significant Points:

• Employment is expected to decline over the next 10 years because of increasing automation of fabrication plants in this country and the building of many of the new plants abroad.
• An associate degree in a relevant curriculum is increasingly required.

Electronic semiconductors—also known as computer chips, microchips, or integrated circuits—are the miniature but powerful brains of high-technology equipment. Semiconductors are composed of a myriad of tiny aluminum or copper lines and electric switches, which manipulate the flow of electrical current. Semiconductor processors are responsible for many of the steps necessary in the manufacture of each semiconductor that goes into personal computers, missile guidance systems, and a host of other electronic equipment.

Semiconductor processors are the production workers who manufacture semiconductors in disks of varying sizes, generally eight to twelve inches wide. These disks, called wafers, are thin slices of silicon on which the circuitry of the microchips is layered. Each wafer is eventually cut into dozens or scores of individual chips.

Semiconductor processors make wafers by means of photolithography, a printing process for creating patterns from photographic images. Operating automated equipment, workers imprint precise microscopic patterns of the circuitry on the wafers, etch out the patterns with acids, and replace the patterns with metals that conduct electricity. Then, the wafers receive a chemical bath to make them smooth, and the imprint process begins again on a new layer with the next pattern. Wafers usually have from 8 to 20 such layers of microscopic, three-dimensional circuitry.

Semiconductors are produced in semiconductor-fabricating plants, or 锟絝abs.锟? Within fabs, the manufacturing and cutting of wafers to create semiconductors takes place in 锟絚leanrooms锟?#151;production areas that must be kept free of any airborne matter, because even extremely small particles can damage a semiconductor. All semiconductor processors working in cleanrooms—both operators and technicians—must wear special lightweight outer garments known as 锟絙unny suits.锟? These garments fit over clothing to prevent lint and other particles from contaminating semiconductor-processing worksites.

Operators, who make up the majority of the workers in cleanrooms, start and monitor the sophisticated equipment that performs the various tasks during the many steps of the semiconductor production sequence. They spend a great deal of time at computer terminals, monitoring the operation of the equipment to ensure that each of the tasks in the production of the wafer is performed correctly. Operators also may transfer wafer carriers from one development station to the next; in newer fabs, the lifting of heavy wafer carriers and the constant monitoring for quality control are increasingly being automated.

Once begun, the production of semiconductor wafers is continuous. Operators work to the pace of the machinery that has largely automated the production process. Operators are responsible for keeping the automated machinery within proper operating parameters.

Technicians account for a smaller percentage of the workers in cleanrooms, but they troubleshoot production problems and make equipment adjustments and repairs. They also take the lead in assuring quality control and in maintaining equipment. To keep equipment repairs to a minimum, technicians perform diagnostic analyses and run computations. For example, technicians may determine if a flaw in a chip is due to contamination, and peculiar to that wafer, or if the flaw is inherent in the manufacturing process.

The work pace in cleanrooms is deliberately slow. Limited movement keeps the air in cleanrooms as free as possible of dust and other particles, which can destroy semiconductors during their production. Because the machinery sets the operators锟?rate of work in the largely automated production process, workers maintain an easygoing pace. Although workers spend some time alone monitoring equipment, operators and technicians spend much of their time working in teams.

Technicians are on their feet most of the day, walking through the cleanroom to oversee production activities. Operators spend a great deal of time sitting or standing at workstations, monitoring computer readouts and gauges. Sometimes, they must retrieve wafers from one station and take them to another.

The temperature in the cleanrooms must be kept within a narrow range: usually, it is set at a comfortable 72 degrees Fahrenheit. Although bunny suits cover virtually the entire body, except perhaps the eyes (over which workers wear protective glasses), their lightweight fabric keeps the temperature inside fairly comfortable as well. Entry and exit of workers in bunny suits from the cleanroom are controlled to minimize contamination, and workers must be reclothed in a clean suit and decontaminated each time they return to the cleanroom.

Several highly toxic chemicals are used at various points in the process of manufacturing semiconductors. Workers who are exposed to such chemicals can be seriously harmed. However, semiconductor fabrication plants are designed with safeguards to ensure that these chemicals are handled, used, and disposed of without exposure to workers or the surrounding environment. Toxic chemicals are applied to wafers by computer-controlled machine tools in sealed chambers and there is normally little risk of workers coming into contact with them.

Semiconductor-fabricating plants operate around the clock. For this reason, night and weekend work is common. In some plants, workers maintain standard 8-hour shifts, 5 days a week. In other plants, employees are on duty for 12-hour shifts to minimize the disruption of cleanroom operations brought about by changes in shift. In some plants, managers allow workers to alternate schedules, thereby distributing the overnight shift equitably.

People interested in becoming semiconductor processors—either operators or technicians—need a solid background in mathematics and the physical sciences. In addition to applying these disciplines to the complex manufacturing processes performed in fabs, math and science knowledge are essentials for pursuing higher education in semiconductor technology—and knowledge of both subjects is one of the best ways to advance in the semiconductor fabricating field.

Semiconductor processor workers must also be able to think analytically and critically to anticipate problems and avoid costly mistakes. Communication skills also are vital, as workers must be able to convey their thoughts and ideas both orally and in writing.

For semiconductor processor jobs, employers prefer persons who have completed associate degree programs. However, completion of a 1-year certificate program in semiconductor technology offered by some community colleges, supplemented by experience, may also be sufficient; Some semiconductor technology programs at community colleges include internships at a semiconductor fabricating plants. Others persons also may qualify by completing a degree in high-tech manufacturing, a new degree offered by some community colleges that prepares graduates to work in the semiconductor industry, as well as other industries such as pharmaceuticals, aerospace, or automotive. Degree or certificate program graduates who get hands-on training while attending school should have the best prospects.

To ensure that operators and technicians keep their skills current, many employers provide 40 hours of formal training annually. Some employers also provide financial assistance to employees who want to earn associate and bachelor锟絪 degrees to further their career or to work towards becoming a technician.

Summer and part-time employment provide another option for getting started in the field for those who are at least 18 years old and live near a semiconductor processing plant. Students often are hired to work during the summer, and some students are allowed to continue working part time during the school year. Students in summer and part-time semiconductor processor jobs learn what education they need to prosper in the field. They also gain valuable experience that may lead to full-time employment after graduation.

Some semiconductor processing technicians transfer to sales engineer jobs with suppliers of the machines that manufacture the semiconductors or become field support personnel.

Electronic semiconductor processors held approximately 45,000 jobs in 2004. Nearly all of them were employed in facilities that manufacture semiconductors and other electronic components and accessories, though a small percentage worked in plants that primarily manufacture computers and office equipment.

Employment of semiconductor processors is projected to decline between 2004 and 2014. The two main reasons for this are increasing automation and the construction of many newer fabs in other countries. Semiconductor manufacturers are shifting production to larger 12锟?wafers, which produce twice as many chips as fabs making 8锟?wafers. Plants that make 12锟?wafers are more automated, allowing them to sharply increase production with the same number of workers. Additionally, a number of domestic companies are building more fabs overseas, where costs are lower. Imports of semiconductors from non-U.S. companies also are growing and may continue to increase throughout the decade. In spite of the decline in employment, some jobs will open up due to the need to replace workers who leave the occupation.

Despite the expected decline in employment of semiconductor processors, the demand for semiconductor chips remains very high stemming from the many existing and future applications for semiconductors in computers, appliances, machinery, biotechnology, vehicles, cell phones and other telecommunications devices, and other equipment. Moreover, the advent of the new 64-bit microchip and 锟絛ual-core锟?chips is expected to provide the power of computer servers or workstations, onto desktop computers and open up a wealth of new applications, particularly in medical devices.

Industry development of semiconductors made from better materials means that semiconductors will become even smaller, more powerful, and more durable. For example, the industry has begun producing a new generation of microchips made with copper rather than aluminum wires, which will better conduct electricity. Also, technology now exists to make chips for wireless connections to the Internet possible over a range of several miles, while another company will soon be producing chips that will save massive amounts of energy in many kinds of electric products.

Job prospects will be best for people with postsecondary education in electronics or semiconductor technology.

Median hourly earnings of electronic semiconductor processors were $13.85 in May 2004. The middle 50 percent earned between $11.44 and $16.90 an hour. The lowest 10 percent earned less than $9.53, and the top 10 percent earned more than $20.46 an hour.

Technicians with an associate degree in electronics or semiconductor technology generally start at higher salaries than those with less education. About 15 percent of all electronic semiconductor processors belonged to a union.

[Please note that the earnings and salary data listed here is usually from government sources and may be dated, so please make adjustments accordingly. If you would like to access current salary data for literally thousands of occupations, access our Salary Wizard.]

Electronic semiconductor processors do production work that resembles the work of precision assemblers and fabricators of electrical and electronic equipment. Also, many electronic semiconductor processors have academic training in semiconductor technology, which emphasizes scientific and engineering principles. Other occupations that require some college or postsecondary vocational training emphasizing such principles are engineering technicians, electrical and electronics engineers, and science technicians.

For more information on semiconductor processor careers, contact:

• Maricopa Advanced Technology Education Center (MATEC), 2323 West 14th St., Suite 540, Tempe, AZ 85281. Internet: https://matec.org/ops/career.shtml

*Source: Bureau of Labor Statistics, U.S. Department of Labor. Used by permission.